For Commercial, Military and Private
Life Support
by Mako
(Brochures, Price List, Photos Available)
– Request Pricing Information –
Features:
- Non-lube, hydrocarbon-free, triple sealed and vented from the drive air section.
- Stainless steel, 5000 psi maximum oxygen working pressure
Air driven,
balanced opposed piston type,
two stage.
The Model 26968 Oxygen Booster Unit is designed for use of filling Oxygen cylinders for use in commercial and military scuba diving applications, has come to realize broader applications in the transferring of oxygen into various high pressure receivers many industrial applications.
This model will pump from high or medium pressure sources and will also function effectively to collect and transfer the gas from partially depleted supply cylinders to “top off” other cylinders in order to maximize pressure.
Conventional compressed air sources are used for all power and control. No electrical connections are required.
The basic booster is two-stage. A pneumatic control package continually monitors both inlet cylinder pressure and outlet receiver pressure, stopping the booster automatically when desired outlet or minimum inlet pressure is reached, thus permitting unattended operation.
Features
Drive is low friction, slow speed cycling air cylinder, designed for continuous duty without air line lubrication. Vented distance pieces insure hydrocarbon-free gas section operation. High pressure oxygen seals are wear compensating, immune to sudden failure and operate completely non-lube, oil free.
Very cold air (as low as -20 degrees F) is a natural by-product from the air powered drive exhaust. This frigid exhaust air is channeled through a system of cooling jackets and interstage cooler, resulting in high pressure cylinder temperatures well below limits needed for long life of critical parts.
Inlet gas supply pressure acts directly through the opposed piston construction to assist the air drive during the compression stroke, conserving power required by the drive in direct proportion to the gas supply pressure.
Booster
Air driven, balanced opposed piston type, two stage.
High Pressure Oxygen Chambers
Non-lube, hydrocarbon-free, triple sealed and vented from the drive air section.
High Pressure Sections, Tubing & Fittings
Stainless steel, 5000 psi maximum oxygen working pressure.
Air Driven Section
No oiling required, corrosion resistant, factory lubed at assembly, 150 psi maximum drive pressure.
Particle Filters
Inlet and outlet gas: 5 micron. All stainless steel.
Gauges
Stainless steel tube, solid front 4.5″ dial size.
Port Sizes
Inlet and outlet gas: 1/4″ NPT female; Air Drive: 1/2″ NPT female.
Control Range Adjustment
Inlet minimum: 150 to 850 psi cutout.
Outlet maximum: 800 to 5,000 psi cutout.
Safety relief (outlet): 800 to 5,000 psi.
Cooling
With air exhaust to both stages and intercooler.
Noise
80 db range pulses, depending on working pressure (measured at 30 inches from booster).
Maintenance
Simple seal kit replacement.
Installation
No special foundation, no tie down required, and no electrical connections.